Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MFC 10 & 8 messages on terminal

Status
Not open for further replies.

rajdhani

Vendor
Jul 22, 2005
21
AP
Hi

We are getting continously MFC 10 & 8 error messages on the terminal, We have R2MFC DID for incoming ,some times the channels gets locked out.Tried with all NEDC & FEDC arrangements & MFC IDLE signals but no improvements.

Any inputs on this is highly appreciated.

regds

Raj
 
This is what i find on the Nortel Site.
MFC 10
MFC008
Cause:
Wrong setup in MFC table.

Fix:
Change IDLE value in LD 94 from 2 to 7.

Ronald
 
Hi

I tried that option , of setting the Idle value to 7 in XMIT of lvl 2 forward signal but there is no improvements.

raj
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top