TSE 4.0 incoming calls over SIP route are wroking fine but can not get MEX to work, did any one try MEX over SIP route?if so please post needed commands and route configuration please.
According to the 4.0 documentation it is:
From Operational Directions, ME and RE over SIP
142/154 31-ANF 901 14
"Initiate the directory number for the remote extension
number_initiate -numbertype ex -number 479
MOBILE AND REMOTE EXTENSION OVER SIP
17 142/154 31-ANF 901 14 Uen B 2009-12-07
• Initiate the remote extension
GEDIIIR=479,LIM=3,CSP=1;
IPEXIIR=479,AUTREG= YES ,TERMID=
"479@c-253.btrunk.se" ,URI=
"ROU:77;remote-number=719001234567" ;
• Initiate the number conversion data
number_conversion_initiate -entry 00 719001234567 \
-conversiontype 6, -truncate 14 , -pre 479
What is your problem? At call from the mobile the dialed number need to be prefixed with the R1 number as normal. That is the only thing missing in the config. Then you use a "normal" SIP-trunk to you provider.
Hi Telelion,
While MX-ONE version 4.0 is just released, and only commercially available in a limited number of markets, I assume that you are part of the Field Trial Project organisation.
How come you post questions like these in this forum.
Why don't you simply ask the Aastra engineers what to do?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.