Message waiting tone on analog phone

[fsandoval63]

I have an analog phone without message waiting light and I need to setup voice mail on that extension.
I setup the voice mail box in Call Pilot and change the TN class of service to mwa.
When I left a message the phone has like a busy tone, do you guys know how to change that tone?

Thanks in advance

TYPE FTC
TABL 0
NCAD 001
NBCS
XTON 002
DCAD 004
DBCS
XTON 002
ICAD 005
IBCS
XTON 002
RCAD 001
RBCS
XTON 002
GCAD 001
GBCS
XTON 002
HCAD 003
HBCS
XTON 002
PCAD 001
PBCS
XTON 000
XCAD 000
NDR1 PBX 004
NDR1 BCS
XTON 002
XCAD 004
NDR2 PBX 004
NDR2 BCS
XTON 002
XCAD 004
NDR3 PBX 004
NDR3 BCS
XTON 002
XCAD 004
NDR4 PBX
NDR4 BCS
XTON 002
XCAD 004
DIAL
XTON 004
XCAD 000
SPCL
XTON 004
XCAD 000
CDT
XTON 004
XCAD 000
CFDT
XTON 006
XCAD 000
MWDT
XTON 004
XCAD 017
CFMW
XTON 004
XCAD 018
BUSY
XTON 007
XCAD 016
RGBK
XTON 005
XCAD 031
ARBK
XTON 011
XCAD 002
FFCT
XTON 004
XCAD 000
LIMT
XTON 009
XCAD 002
NRMT
XTON 009
XCAD 018
AWUT
XTON 007
XCAD 017
OVFL
XTON 007
XCAD 017
TEST
XTON 008
XCAD 000
ERWT
XTON 003
XCAD 000
ACFT
XTON 003
XCAD 000
EEST
XTON 003
XCAD 000
CAMP
XTON 003
XCAD 000
CDNC 017
ACBT
XTON 003
XCAD 000
CDNC
AOBT
XTON 003
XCAD 000
CDNC 018
CAB
XTON 043
XCAD 019
CDNC 019
INTU
XTON 003
XCAD 000
CDNC 019
CWT
XTON 003
XCAD 000
CDNC 020
OBKT
XTON 003
XCAD 000
CDNC 017
OVRD
XTON 003
XCAD 000
CDNC 018
OHQ
XTON 003
XCAD 000
CDNC 003
SRT
XTON 003
XCAD 000
CDNC 021
TMAT
XTON 003
XCAD 000
CDNC 022
TMOT
XTON 003
XCAD 000
CDNC 023
TSUT
XTON 003
XCAD 000
CDNC 023
ABST
XTON 004
XCAD 000
CDNC 208
PNNC
XTON 000
XCAD 000
CDNC 000
SRC1
XTON 000
XCAD 000
SRC2
XTON 000
XCAD 000
SRC3
XTON 000
XCAD 000
SRC4
XTON 000
XCAD 000
SRC5
XTON 000
XCAD 000
SRC6
XTON 000
XCAD 000
SRC7
XTON 000
XCAD 000
SRC8
XTON 000
XCAD 000
CFSN
XTON 004
XCAD 000
CPOQ
XTON 003
XCAD 000
RGAR
XTON 004
XCAD 000
RPCT
XTON 004
XCAD 000
RGAB
XTON 007
XCAD 000
MWAN
XTON 004
XCAD 000
DNDA
XTON 004
XCAD 000
SSLK
XTON 004
XCAD 000
P10 8
ID1 768
ID2 512
IDD 384
RVDL 0

 

[Johnthephoneguy]

If you are hearing stutter dial done, sort of like duh duh duh duh duh then solid tone, that is the MWA indicator for analog lines.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[fsandoval63]

Thanks John, but the problem is that the "busy tone" is continuos and I dont have solid tone. Is there something to change in the FTC ?

 

[Johnthephoneguy]

is it a true busy signal like the line is busy or more like the stutter dialtone with it going to a solid tone?

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[fsandoval63]

It is a true busy signal. Maybe I have to change tone or cadence in LD 56 but I don't know the numbers means. I will apppreciate any help

 

[GHTROUT]

Just try putting other numbers in this:

MWDT
XTON 004
XCAD 017

You can always change it back. You can look up the other letter codes so you can identify what it might sound like if you duplicate them. For example, Call Forward Reminder Tone is:

CFDT
XTON 006
XCAD 000

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]