Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message Waiting Notification Options

Status
Not open for further replies.

selseybob

Technical User
Feb 9, 2006
4
GB
Can anyone please detail how to change the message waiting notification on analogue phones from an intermittant ring to a broken dial-tone?

Also what is the earliest level of software that will support this function?

Many thanks in advance.
 
Hi
LOBOUND 331 determens vhich tone function to use for
message waiting ticker. (dial tone when meassage present)

If You have sw 810.x you can try this
CHBOND:331,X; were X is the tone to be used. Here in Denmark we use the "diversion active" tone, 9
Check with
DIMDAT:0,331;

Change with this
CHBOND:331,9;

If the systems tells You that this is a unsafe bound, You can not use this method. Then You have to retrive the config
change the value of bound 331, and reproject the system.

If you do not use the same tone as we do, You can define a new "diversion active" tone nbr. 9 like this:
CHPMPD:5,9,2,0;
0,8,33,0;
1,1,2,0;
;

Regards
Jan Larsen
E-mail me if You have any problem with this
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top