Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message Waiting Light

Status
Not open for further replies.

phreak23

Technical User
Jun 2, 2005
86
US
Will the IPO500 with VMPro activate the MWL on the 6221 single line phones? I'm pretty sure it wont with the 8100 series phones, but I'm not sure on the 6200 series phones.
 
In the docs from 5.0 it supported for; 6211,6219,6221



Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
I would almost bet on it that it would work with the 8100 sets too. You can set the type of message light trigger in the extension - analog tab and set different parameters for it. As long as the analog set has a MWI I would say you can find a setting that will work.

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it :)
 
Thanks Bas1234. I guess I could have looked it up too; I felt pretty foolish having you do the work that I should have done.
For this you get a Purple Star.
 
Sounds painfull :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
Indeed, and he said that he would gave me a purple star be then he forgot to confirm it in the popup screen..:p

thnx phreak23 :)

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top