Message Waiting Lamp isn't working in TSE

[RomeoAlfa]

We have two PBX system (one is TSW SP6 and the other TSE 4.1 SP1.)and have only one Voice Mail system in TSW.

The MEW is working fine in TSW system, but isn't working in TSE.

We use Aastra 6731i and Aastra 6757i SIP phones in TSE system and H. 323 trunks between two system.

If we check MEW state of an extension in TSE, we don't see, that MEW is activ!

susip:dir=3556;
STATUS INFORMATION AT 08:48 18OCT10
DIR TYPE TRAFFIC STATE/PTR LINE STATE DIV STATE ADD INFO
3556 IPX IDLE #62B4 ASSIGNED PEN LIST=1


We use between two system H 323 trunks, with follow parameters:

in TSW:

rocap:rou=65;
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
65 4110000000000010 4 3110000001 0 30 128 00151515 011110100091 001100

rodap:rou=65;
ROU TYPE VARC VARI VARO FILTER
65 TL65 H'00000110 H'00000011 H'00000000 NO

roddp:dest=1600;
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
1600 65 061610000000025000600000000 0 1 0

in TSE:

rocap:rou=65;
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
65 4110000000000010 4 3110000001 0 30 128 00151515 011110100091 001100

END

rodap:rou=65;
ROU TYPE VARC VARI VARO FILTER
65 TL65 H'00000110 H'00000011 H'00000000 NO

roddp:dest=3;
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
3 65 160610000000025000600000000 0 1 0


Can you help us, why isn't working MEW lamp in TSE?

BR:

RomeoAlfa

 

[RomeoAlfa]

Now it is working fine, with DEST=06161...., the fault was in Voice Mail System.

We restared Voice Mail System and after MEW is working fine in another site with this DEST.

BR:

Romeo