Message Operator (OPI) 1

[Omissam]

How to assign a message of welcome to incoming calls to operators (OPI)

Thank you

 

[Satellite1900]

Hi,
you need a VSU2 card or a OneBox Messaging

\Satellite1900

 

[Omissam]

On my MD110 BC12 / sp 10 is located is VSU2 but also a ONE-BOX system, how can I configure it?

 

[Satellite1900]

Is usually written on a forum when you have a problem, now you write in this forum to find out how things are done completely! Where is your technical documentation? You have minimally idea of what a PABX?
There are still in this technical forum with a capital T?

\Satellite1900

 

[Omissam]

Ok Satellite, however, you are not obliged to give me an answer to my questions.
I think that a forum is to help even when the apparatus to be managed is not known at all like in my case for VSU2.
However I find it unprofessional to do appraisals or technical assessments of people who do not even know.
A technician with a capital T as you say you would not do that !!!

 

[inlsp05]

CNHUI:BPOS=X-XX-XX; for the VSU1

RAEQI:BPOS=X-XX-XX,VSID=1,COMPR=NO; initiating an equipment position

RADNIIR=XXXX,VSID=1,CAT=X;assigning a directory number to a VSID to support message programming from an extension

Call from another extension the number of RANDI and records the messages

RADSI:VSID=1,ANN=1; assigning announcement numbers to a voice server board identity number, this example for only one announcement
RADSI:VSID=1,ANN=2; and so on for all announcement

RAMDI:ANN=1,MSG=1; assign the announcement to messages
RAMDI:ANN=2,MSG=2; and so on

explains in detail what you need to do for the rest of the programming.
commands vary according to your needs and we also check the ASPAP
forgot
When the programming session is established, the text message, "VSU READY", is displayed if the DTS has a LCD display.
To start recording, enter the procedure, 2*the message number#.
The recording stops when the # key is pressed and the message is stored.
it is possible to play the message by pressing the procedure, 1*the message number#.
it is possible to erase the message by pressing the procedure, 3*the message number#.

 

[Omissam]

Inlsp05 thanks for helping me.

 

[inlsp05]

omissam you must know this
every body can ask here..... and another can answer or not .... but my choice is answer..

 

[Omissam]

Thanks again inlsp05

 

[fcpli]

In the case you have an OPI, you need to create a RAGAI for the CORG (call origin group) with RAGAI:CORG=x,welcom=y; where x= call origin from OPCGP and y = welcome message number, or a continuous message with RACEI, like RACEI:OPE=xxxx&&yyyy,cont=z; where x and y are opi individual numbers and z is the message number.
Depends what you are looking for.
Satellite1900: Just leave it......

 

[Satellite1900]

My dear Omissam, a technician with or without capital T study and read the documentation, try and try again! Only after having read and studied in case of problems ask for help, a technician does not ask how do totally a thing not knowing anything.
Yours sincerely

\Satellite1900

 

[Omissam]

Ok! Everything works perfectly !!!

I thank you, Inlsp05 and Fcpli for the help you gave me.

Bye

Omissam