easynetworks91
Technical User
Hey guys,
One of our customer's is using a Panasonic KX-TDA15 with a KX-TVM50 voicemail unit.
When a call comes in through the ISDN, the call gets forwarded to the TVM on extension 500, which then goes through its custom service menus. Option 2 goes directly to mailbox 201 which is for school absences, this shows a message waiting light once a voicemail message has been left on the reception handset, which is extension 201.
If the caller presses option 4 they get forwarded to hunt group 601, which has several handset in it, including extension 201. The issue we're having is that after a certain amount of time of ringing the handsets (about 15 seconds), the call fails and prompts a menu: press 1 to leave a voicemail or press 0 to speak to the operator. Pressing 1 leaves a voicemail in the general mailbox 998.
Ideally, any messages at this point would be pointed instead towards mailbox 201, or the mailbox 998 to show a message waiting light on extension 201. Any Panasonic documentation I've looked at has not revealed any answers to myself.
Does anyone have some insight on the matter? Thank you.
One of our customer's is using a Panasonic KX-TDA15 with a KX-TVM50 voicemail unit.
When a call comes in through the ISDN, the call gets forwarded to the TVM on extension 500, which then goes through its custom service menus. Option 2 goes directly to mailbox 201 which is for school absences, this shows a message waiting light once a voicemail message has been left on the reception handset, which is extension 201.
If the caller presses option 4 they get forwarded to hunt group 601, which has several handset in it, including extension 201. The issue we're having is that after a certain amount of time of ringing the handsets (about 15 seconds), the call fails and prompts a menu: press 1 to leave a voicemail or press 0 to speak to the operator. Pressing 1 leaves a voicemail in the general mailbox 998.
Ideally, any messages at this point would be pointed instead towards mailbox 201, or the mailbox 998 to show a message waiting light on extension 201. Any Panasonic documentation I've looked at has not revealed any answers to myself.
Does anyone have some insight on the matter? Thank you.