Message Networking CS1K to BCM400. Have tried just about everything

[againwiththis]

Hello.

Trying to forward and transfer messages from BCM400 to CS1k/Call Pilot. Works BCM to CS1K but not other way around.

Have MCDN, AMIS/VPIM keycodes installed.

What am I doing wrong???

Thanks

 

[GHTROUT]

Answer: Posting without telling us what you get or what you have done.

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[againwiththis]

Fair enough...

Have configured CDP steering codes and VPIM shortcuts. Composed messages from Call Pilot to BCM never get there.

Sending message from Call Pilot, Nortel Nancy says, "message sent. message sent and deleted".

Over ridden/bypassed DNS using host file entry in the Call Pilot Server. Or so we think...

What else do you want to know?

 

[GHTROUT]

Also note there is a Call Pilot forum. You might want to cross post to forum1553

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]