Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message IVD 000 OUT 00000004 0000FF65 loop

Status
Not open for further replies.

ItTevGar

IS-IT--Management
Oct 12, 2022
2
DO
hello

So, I have recently Joined a Company. Between one of my duties i have to take care all things related to a Nortel Meridian PBX Option 11 (i think Option 11C).

recently it have been showing a constant message loop of:

IVD 000 OUT 00000001 0000FF6A 00004002 E01F4A69
IVD 000 OUT 00000001 0000FF6B 00004002 E01F4A6A
IVD 000 OUT 00000001 0000FF6C 00004002 E01F4A6B
IVD 000 OUT 00000001 0000FF6D 00004002 E01F4A6C
IVD 000 OUT 00000001 0000FF6E 00004002 E01F4A6D
IVD 000 OUT 00000001 0000FF6F 00004002 E01F4A6E
IVD 000 OUT 00000004 0000FF60 00004002 E01F88B0

and keeps going and going. Non stop (you can check part of the message in the attachment) :(

i would apreciate any help, since i mostly have zero knowledge about this system

 
I have done a search and have come across this very old record below.

Problem
IVD 000 OUT 0002 FF6C 0001

I
IVD messages continously outputting from TTY

General Summary
Due to illegal command being entered in Debug
In this example Option11E Rel 21.54
Contact Nortel to fix or reload the switch

Full Answer
IVD 000 OUT 0002 FF6C 0001
IVD 000 OUT 0006 FF61 4009
IVD 000 OUT 0053 C410 000C
IVD 000 OUT 0053 C410 001C
IVD 000 OUT 0053 C410 002C
IVD 000 OUT 0053 C410 003C
IVD 000 OUT 0053 C410 004C
IVD 000 OUT 0053 C410 005C
IVD 000 OUT 0053 C410 006C
IVD 000 OUT 0053 C410 007C
IVD 000 OUT 0053 C410 008C
IVD 000 OUT 0053 C410 009C
IVD 000 OUT 0053 C410 00AC
IVD 000 OUT 0053 C410 00BC

The answer doesn't offer much help. It might be easier to find out the software version first. Can you post a picture of the main cabinet showing the equipment cards?.

The card on the left in slot "0" next to the power unit is the CPU. What does it say?.
The 11c versions would say "SSC" and the older versions said something different such as "Syst Core" etc.

You might have to do a full shutdown for a few minutes, but I'd only consider doing that as a last resort.

If you can log in OK, go to LD 22 and key in ISS , then TID and finally SLT and keep a copy of the output.





Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
sure you can see it here:
that is the main cabinet, next to it there are two more cabinets.

the Card in slot ¨0¨ says SSC - NTDK20AB.

i able to log the only problems is that the constant IVD 000 out loop make it difficult to write, but i did manage to copy the output by pencil, here it is:

ISS: Version 2111
release 23
Issue 55+

TID: System ID: 10070733
Aux ID: 10070733

SLT: TNS 1000 letf 634 used 366
AGNT 1000 left 988 used 12
ACDN 300 left 288 used 12
AST 300 left 300 used 0
BRI DSL 100 left 100 used 0
LTID 100 left 100 used 0
DCH 64 left 64 used 0
AML 16 left 15 used 1
RAN CON 12 left 12 used 0
RAN RTE 9999 left 9999 used 0
MUS CON 100 left 100 used 0
MOPT 00000
KEY1 22343151
KEY2 54012065
KEY3 72512011

ttps://files.engineering.com/getfile.aspx?folder=cfec095e-8a96-4722-9c9d-ec8f1023e1ee&file=20221014_131948.jpg
 
Log in and go into LD43 and at the ".", key in DAT.

This should list 3 backups. The main and external backups should be the same. If they are, then try a reboot.

The other way as a workaround would be to remove "MTC" from the TTY that you log in with.

This is done in LD17

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top