Message Indicator (Next To LCD Display) flashing on ALL phones. Indicator is programmed for Voice Mail Messages. There are no messages. Separate Voice Mail Access Button on phone programmed for the station's voice mail does not light unless there is actually a voice mail for the station. Voice Mail (Hard-drive version) is working fine, it takes messages, auto attendant works, etc. Power down or rest the KSU the light goes out. It later comes back on and stays on until a KSU reset or power down. After reseting the KSW light comes back on randomly, ie no certain time frame before it comes back on. If Voice Mail card is reset and rebooted, no errors show on the video connected to the voice mail card, but Indicator Light remains lit on the phones.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Message Indicator (Next To LCD) Flashing On ALL Phones
- Thread starter EBechler
- Start date
nfcphoneman
Vendor
Hello! It would be helpful to know which model Vodavi you have.
Some models could illuminate the light if there is a CO VM alert coming from your carrier. In Flash 50, Page B, Button 15 try changing to "3" = "Message Wait.
Jacksonville Florida Telephone Systems
Some models could illuminate the light if there is a CO VM alert coming from your carrier. In Flash 50, Page B, Button 15 try changing to "3" = "Message Wait.
Jacksonville Florida Telephone Systems
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question