Merlin Magix - Line Selection

[offdahook]

I have a 6 line phone and I want the 4th line to be selected as soon as I go off hook.

Also I want the calling number to appear on my display on inbound calls, right now all it says is outside line. I have a Vonage POTS line connected to the system.

 

[TouchToneTommy]

Spkr (on SA or Intercom), #00, Press ANY line key, dial *14, now press the lines in the order you want them to be accessed, dial **14, Spkr to exit.

If you wait for the 2nd ring, do you see CID? There is a setting for LS CID Delay, which will delay ringing the phones until the CID is received or the 2nd ring if not.

 

[offdahook]

thanks TouchTone...will try and let you know

 

[pmcook]

Currently a line is selected when going off hook. I need to change ALS to select SA ring first since all line buttons will be replacd by SA buttons. Is this done through *14?

 

[Telecomboy]

Yes. *14 let's you choose what order you grab lines whether they are internal SA lines or external lines/pools.