merlin lines in question

[designz2]

i have a merlin legend 5.0 i have 2 lines comming in i dont want the operator station ringing when incomming calls come in ho w do i have the 2 seperate lines ring on 2 seperate extensions

thank you

 

[TouchToneTommy]

Could you perhaps find the shift key and the punctuation marks as well?

You change the Ringing Options for the lines at the extension in question.

Press Speaker and dial #00. Press the line that you don't want to ring. Dial #45. Press the next line you want to program, or press Speaker to quit.

 

[designz2]

Thanks for the responce.....
So if i need line 804-I to ring on Ext 48 and 805-I to ring on 49 what would the easyest way to do rhis?

 

[TouchToneTommy]

Do your programming from the Console phone:

Menu, SysProgram, Start (or Exit if it is a Legend)


If the lines are not already assigned to the extensions:

Go to Extensions, Lines and Trunks, dial the Extension Number, press Enter. Press Entry Mode, dial the Line Number that you want to assign to the extension, press Enter.


Once the lines are assigned to the extensions:

Press Centralized Telephone Programming, Program Extension, dial the Extension Number and Enter. Press the line button (confirm on the display that you have pressed the correct button), then dial

*35 for NO ring
*36 for DELAYED ring
*37 for IMMEDIATE ring

 

[designz2]

I use WinSpm,thank you for your fast response..

 

[designz2]

It dosen't matter what number i put it it keeps dinging at me
i would say i would be bald when this project is through lol
so i go to lines/trunks and type 48 then it says enter line\trunk numbers.Then i enter 804 and it beeps ?

 

[designz2]

Ok, I got that issue taken care of.Now when call comes in on 804 0r 805 it picks up thanks for the info.Now lol when the pc auto attendent dials ext the ext it rings a couple of times then AA tries to answer it again is it because the ext it is dialing are in the cover group if so how can i remove them thank you again.

 

[SYQUEST]

Besides punctuation, he could use a spell check program too!

....JIM....

 

[designz2]

lol yep i could but dont it really dosent matter does it anyways thanks for all your help its working