Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Merlin Legend System Pool 70 -D Question

Status
Not open for further replies.

Comput3rGuy

IS-IT--Management
Feb 7, 2012
98
US
I have two extensions that are assigned to the Pool that have the button programmed to them when I do an "Inspect". However, when I pick the receiver the pool goes away and no matter what I do to get DT I get denied. I did notice in troubleshooting that other extensions (Working extensions) that there is also a Pool 70-N. So my questions are: What is the Difference? What does the N and the D stand for? And last, How can I make the two non working extensions work as they should? Thanks!
 
D is Delayed ring, N is No ring, you can also have I for Immediate ring

The extensions are restricted in some way, or have forced account code assigned to them

Check under Extensions - Account and do a Restrict Copy from a working extension
 
Actually, you add the pools to the extensions.

Menu
Sys Program
Start
Extensions
Lines / Pools
Dial the extension number
Enter
Entry Mode
Dial ONE of the line numbers that is included in the pool
Enter
Back
Back

This assigned the pool on the next available button on the phone, with Immediate Ring. Now go through Centralized Telephone Programming (or at the actual phone) if you need to change to Delayed or No ring.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top