I'm running a Legend 7.0 with two operator consoles, one has the DSS adjunct connected to the MLX20D (ext 10, logical 0). DSS Pages 1, 2, and 3 all function perfectly, programmed to start with ext 500 on page 1, Ext 550 on page 2 and 600 on page 3. Now when I connect the Merlin Legend II console (DSS is integrated,4 rows of 10 DSS buttons with a 32 button phone), the DSS assignments don't mirror the MLX console. The Legend is programmed to show two consoles, assigned to ext 10 and 22. When I slide the switch to 'programming' mode and press the first DSS button, the display shows "Auto Dial". I was unable to program that button. The DSS numbering scheme on this phone defaults to the lower 2 digit extension assignments, followed by the 500 series. Is there a way to have the Merlin console mirror the MLX DSS adjunct? Thanks for any and all advise!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Merlin Legend Operator DSS
- Thread starter Jim E
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
