Merlin Legend and Caller ID 1

[compuveg]

We've got a legend system with merlin messaging. I'm not very familiar with the stuff, but there's a bunch of 012 boards, a 100D, and a few 012 boards.

Can I get caller ID to show on our mlx-10d handsets? We're running magix 2.1, winSPM 6, merlin messaging 2.5.... I would think it is all caller ID capable, yes, no?

Would the default config be to show caller ID info on the phone if it was available?

If I need a board like the 408 gs/ls-id-mlx instead of the 408 gs/ls-id-mlx I've got, would just one do the trick, or would they all have to be replaced? I thought the 408 board was for either internal or external lines, and they're all setup for internal I believe. Wouldn't the 100D be what picks up the ANI?

Thanks, in advance--

 

[compuveg]

Your patience is immense. just knowing to call this dedicated T1's configuration 'CAS' is helpful information that the phone providers are reluctant to provie, as is evidenced by their insistence on snail mailing a Customer Service Record when requested.

All the poking around I've done in WinSPM, I've not figured out how to get the 100D's configuration out of it. Any hints?

 

[cajuntank]

Sorry for the butt in, but I'm running into a simular situation and have read through this thread a few times trying to make sure this applies to me as well. I have a Merlin Magix with a PRI coming in. I have 016TRR cards providing for single line analog extentions. I have CID on my digital sets, but get no CID info on my analog sets (just some cheap phones from Wal-Mart with CID diplay). Is this by "design" or is something not programmed correctly?

 

[TouchToneTommy]

Analog phones won't display CID, only system phones.