merlin 1030 fm 4 - speed interval of digits

[RickChaisse]

Does anyone know a way to change the speed interval of the speed-dial digits. The customer lost programming and we notice that the interval is extremely fast now and won't trigger a gate on the property.
I've looked through the manual and can't find any reference to this.

Thanks,
Rick

 

[tdaugirdas]

I do not believe there is a way to change the speed - it is supposed to be preset at a standard 10 digits per second. However, if they lost programming - they may have lost the Hold(pause)digit as the first digit on an Outside Auto Dial button - which is required if the local telco is slow in providing dialtone.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[tdaugirdas]

By the way - if the customer lost programming - it probably means that the back-up rechargeable battery on the feature module needs replacement. They only last about 3 to 5 years.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[merlinman]

Sell them a Legend.

Nothing less than R7.

 

[RickChaisse]

LOL

I was hoping there would be a programming parameter that only the X telco guys know, that isn't in the manual.

 

[merlinman]

The X telco guy says:

Sell them a Legend.

Nothing less than R7. [/color red]

 

[tdaugirdas]

Use the Hold (pause) where you need it in the dial string for the autodial button. There is no "magic" parameter. It was probably there before programming was lost.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[RickChaisse]

ok, I get the message.

Thanks, you all.