Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

merlin 1030 fm 4 - speed interval of digits

Status
Not open for further replies.

RickChaisse

Programmer
Sep 5, 2005
38
US
Does anyone know a way to change the speed interval of the speed-dial digits. The customer lost programming and we notice that the interval is extremely fast now and won't trigger a gate on the property.
I've looked through the manual and can't find any reference to this.

Thanks,
Rick
 
I do not believe there is a way to change the speed - it is supposed to be preset at a standard 10 digits per second. However, if they lost programming - they may have lost the Hold(pause)digit as the first digit on an Outside Auto Dial button - which is required if the local telco is slow in providing dialtone.

Tom Daugirdas,
President
STCG, Inc.
stcg.com
 
By the way - if the customer lost programming - it probably means that the back-up rechargeable battery on the feature module needs replacement. They only last about 3 to 5 years.

Tom Daugirdas,
President
STCG, Inc.
stcg.com
 
LOL

I was hoping there would be a programming parameter that only the X telco guys know, that isn't in the manual.
 
The X telco guy says:

Sell them a Legend.

Nothing less than R7. [/color red]
 
Use the Hold (pause) where you need it in the dial string for the autodial button. There is no "magic" parameter. It was probably there before programming was lost.

Tom Daugirdas,
President
STCG, Inc.
stcg.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top