RadioPhoneGuy
Technical User
I am building new routes and I do not get the prompt for TIMR in LD 16. Is there another option that needs to be set to get the TIMR prompt? I have one member on the route.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Meridian TIMR Change values 1
- Thread starter RadioPhoneGuy
- Start date
- Status
bigindian65
Technical User
what type of route? If you did get prompted why do you want to chg default?
Mato' Was'aka
Mato' Was'aka
-
1
- Thread starter
- #3
RadioPhoneGuy
Technical User
This is a 911 trunk route and I need to change
ICF = 128
FLH = 640
When I respond with yes to CNTL I get the TIMR prompt but not the sub codes e.g. ICF,FLH
ICF = 128
FLH = 640
When I respond with yes to CNTL I get the TIMR prompt but not the sub codes e.g. ICF,FLH
- Thread starter
- #4
RadioPhoneGuy
Technical User
Found it. Entering prompt followed by value workd.
Thanks
Thanks
- Status
Similar threads
- Locked
- Question