Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meridian-Option11C transfer to CDP allocated DN

Status
Not open for further replies.

netgun777

Vendor
May 11, 2004
40
AU
Gents,

I faced the issue with call routing on Option 11C Succ 3.0 in specific configuration. Option 11 C based DN does not accept imput for DN located on CDP based system over the tie line to another system. I cna make calls to the same DN and CDP route the call just fine to other side of the tie line using Q.sig. but does not allow the transfer to that DN. I also confirmed that tranferring DN can complete transfer to any other DN within the dialing plan on the Option 11 C side.
Do you guys have any thoughts on thsi ?
 
is the "broken" dn built as a cdn on the 11 side? asup yes will allow that transfer.. not all dn's are created equal// if it's a set based dn.. post the set, that would be very strange

john poole
bellsouth business
columbia,sc
 
Thanks John and no it is actually just standard DN on the Option 11 C. I think that most of the tested DN do not allow this function to any of the CDP based DNs.

Here is one of the "broken" DN sets TNB build

TN 26 11
SPWD
DATE
PAGE
DES

DES 015000
TN 026 0 00 11
TYPE 2006
CDEN 8D
CUST 0
FDN 3602
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA NDD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDD
CFTD SFD MRD DDV CNID MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHA FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN


RCO 0
HUNT 3602
LHK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 3699 0 MARP
CPND
NAME ANNA X
XPLN 24
DISPLAY_FMT FIRST,LAST
01 TRN
02 AO6
03 CFW 4 3602
04
05 MWK 3602
DATE 14 SEP 2005

One of the CDP based DNs transfers fail to is;

MEM AVAIL: (U/P): 504970 USED U P: 522771 135522 TOT: 1163263
DISK RECS AVAIL: 319
REQ PRT
CUST 0
FEAT CDP
TYPE DSC
DSC
DSC 3528
FLEN 0
DSP LSC
RLI 2
NPA
NXX


Thanks for you help here.

CKD
 
Guys

Just noticed one more piece. M2250 with receptionist can certainly complete the transfer, other users cannot just as shown ebove DN. Is this relating to cls?

Thanks so much
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top