Meridian option 61 and Ericsson MD110

[antek]

Hi

We have 3 PBX connecting together by ISDN Qsig, one Meridian option 61 and two Ericsson MD110, one from this MD110 is transit Exchange our problem is when we make a call from MD110 (not transit) to Meridian we can see the caller ID at our extension (this call come troughs the transit exchange), if we received calling from Meridian to the MD110 (not transit) we cannot see the caller ID just see privet call at our extensions.

Caller ID working ok if we have direct connection between MD and Meridian

Please advice

 

[johnpoole]

nd2 in rcap on the d channel

john poole
bellsouth business
columbia,sc

 

[antek]

hi john poole

Sorry I don’t understand and I don’t have experience with Meridian but I have some at Md110, generally I need Full parameter to connect Meridian option 61 with Ericsson MD110 by E1 as network.

Rout from MD110 to Meridian configured as the following

ROCAI: ROU=72,SEL= 012000000000,TRM=5,SERV=2110000010,TRAF= 00151515,SIG= 111101000031;
RODAI: ROU=72,TYPE=SL60,VARI=15400000,VARO=06400000,VARC=00000310;
RODDI: DEST=XX, ROU=72,ADC= 0606100000000250,TRC=0;

best regards

 

[johnpoole]

the route in the meridian needs to be built the same

prt
TYPE adan dch 19

ADAN     DCH 19 
  CTYP MSDL 
  GRP  0 
  DNUM 9 
  PORT 1 
  DES  Ericsson 
  USR  PRI 
  DCHL 19 
  OTBF 32 
  PARM RS422  DTE 
  DRAT 64KC
  CLOK EXT 
  IFC  S100
  SIDE NET 
  CNEG 1 
  RLS  ID  36 
  RCAP ND2 TAT 
  MBGA NO
  OVLR NO
  OVLS NO
  T200 3 
  T203 10 
  N200 3 
  N201 260 
  K    7 

REQ  


prt
TYPE: rdb
CUST 0
ROUT 66

TYPE RDB  
CUST 00 
ROUT 66 
DES  Ericsson 
TKTP TIE 
NPID_TBL_NUM   0
ESN  NO  
CNVT NO  
SAT  NO  
RCLS EXT 
VTRK NO  
DTRK YES 
BRIP NO  
DGTP PRI 
ISDN YES 
    MODE PRA 
    IFC  S100
    SBN  NO
    PNI  00001 
    NCNA YES 
    NCRD YES 
    CHTY BCH 
    CTYP UKWN
    INAC NO  
    ISAR NO  
    CPUB OFF 
    DAPC NO  
    BCOT 0 
DSEL VCE 
PTYP PRI 
AUTO NO  
DNIS NO  
DCDR NO  
ICOG IAO 
SRCH RRB 
TRMB YES 
STEP 
ACOD 8866
TCPP NO  
TARG 
CLEN 1 
BILN NO
OABS 
INST 
IDC  NO  
DCNO 0 *
NDNO 0 
DEXT NO  
ANTK 
SIGO STD 
ICIS YES
TIMR ICF  512 
     OGF  512 
     EOD  13952 
     NRD  10112 
     DDL  70 
     ODT  4096 
     RGV  640 
     GRD  896 
     SFB  3 
     NBS  2048 
     NBL  4096 



PAGE 002 

     IENB  5 
     TFD  0 
     VSS  0 
     VGD  6 
DRNG NO  
CDR  YES 
INC  NO  
LAST NO
QREC NO  
OAL  YES 
AIA  NO  
OAN  YES 
OPD  YES 
CDRX NO  
NATL YES 
VRAT NO  
MUS  YES 
MRT  14 
RACD NO  
EQAR NO  
FRL  0 0 
FRL  1 0 
FRL  2 0 
FRL  3 0 
FRL  4 0 
FRL  5 0 
FRL  6 0 
FRL  7 0 
OHQ  NO  
OHQT 00 
CBQ  NO  
AUTH NO  
TDET NO  
TTBL 0 
ATAN NO  
PLEV 2 
ALRM NO  
ART  0 
SGRP 0 
AACR NO

REQ: 



DATE 
PAGE 

DES  Ericsson 
TN   019 01 
TYPE TIE 
CDEN SD
CUST 0 
TRK  PRI 
PDCA 1 
PCML MU
NCOS 6 
RTMB 66 1 
B-CHANNEL SIGNALING 
TGAR 1 
AST  NO  
IAPG 0 
CLS  UNR DTN WTA LPR APN THFD HKD 
     P10 VNL 
TKID 
DATE 21 JAN 2004

john poole
bellsouth business
columbia,sc

 

[antek]

Hi johnpoole,

Thanks for your kindly support
I will test and welcome back soon

best regards

 

[antek]

Hello,

The person he has expert with Meridian option 61 r22 cannot change the rout parameters and he told us the problem from Ericsson and Meridian cannot accept this new parameters, now we still have the same problem with Ericsson PBX and we need urgent help

Meridian option 61programing as the following

Qatar Gas / Ras laffan /4736xxx
OPT-61C
--------------------------------

REQ: pkg------------System package

TYPE pkg
OPTF 1
CUST 2
CDR 4
CTY 5
RAN 7
TAD 8
DNDI 9
EES 10
INTR 11
ANI 12
ANIR 13
BRTE 14
DNDG 16
MSB 17
SS25 18
DDSP 19
ODAS 20
DI 21
DISA 22
CHG 23
CAB 24
BAUT 25
BQUE 28
NTRF 29
NCOS 32
CPRK 33
SSC 34
IMS 35
UST 35
UMG 35
ROA 36
NSIG 37
NSC 39
BACD 40
MUS 44
ACDA 45
MWC 46
AAB 47
GRP 48
NFCR 49
FCA 52
SR 53
AA 54
HIST 55
BARS 57
NARS 58
CDP 59
PQUE 60
FCBQ 61
OHQ 62
NAUT 63
SNR 64
TDET 65
NXFR 67
HOT 70
DHLD 71
LSEL 72
SS5 73
DRNG 74
PBXI 75



PAGE 001

DLDN 76
CSL 77
OOD 79
SCI 80
CCOS 81
ATM 84
TENS 86
FTDS 87
DSET 88
TSET 89
LNR 90
DLT2 91
CPND 95
DNIS 98
BGD 99
MR 101
OPAO 104
MCT 107
ICDR 108
APL 109
TVS 110
IDC 113
DCP 115
CCDR 118
EMUS 119
PLDN 120
FTC 125
BKI 127
MFC 128
DTI2 129
SUPP 131
TBAR 132
ENS 133
LSCM 137
DTD 138
FFC 139
DCON 140
MPO 141
ABCD 144
ISDN 145
PRA 146
ISL 147
NTWK 148
DNXP 150
CDRE 151
IAP3P 153
PRI2 154
THF 157
NAS 159
FNP 160
ISDN INTL SUP 161
SAR 162
LAPW 164
GPRI 167
COOP 169
ARIE 170
ECCS 173
AAA 174
NMS 175
HVS 179
DKS 180



PAGE 002

TFM 182
OVLP 184
EDRG 185
L1MF 188
SECL 191
ORC-RVQ 192
OHOL 196
IPRA 202
XPE 203
XCT0 204
XCT1 205
BRI 216
MSDL 222
MSDL SDI 227
MSDL STA 228
SSAU 229
BRIT 233
FCDR 234
BRIL 235
MULTI_USER 242
ALRM_FILTER 243
SYS_MSG_LKUP 245
VMBA 246
DPNA 250
SCDR 251
ARFW 253
PHTN 254
ADMINSET 256
ATX 258
CDRX 259
EURO 261
QSIG 263
UIGW 283
MAT 296
CPP 301
QSIGGF 305
CPRKNET 306
PAGENET 307
TATO 312
OPEN ALARM 315
QSIG-SS 316
ETSI-SS 323
-------------------------------------------------------------------

REQ iss
TIM001 12:15 3/4/2005 CPU 0

----------------------System Release
VERSION 1811
RELEASE 22
ISSUE 46 +

IN-SERVICE PATCHES : 1
PAT# PRS AUTH ID NAME DATE FILENAME
00 BV79063 29/MAY/98 p10629 0/0/0 p10629.cp1

--------------------------------------------------------------------------

REQ prt
TYPE adan

ADAN DCH 40
CTYP MSDL
DNUM 14
PORT 1
DES QSIG_UTB----------This Channel is connected to MD-110 ( Up-Stream )
USR PRI
DCHL 3
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
NASA YES
IFC ESGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE NET
CNEG 1
RLS ID 22
RCAP NCT COLP NDS CCBS CCNR
MBGA NO



PAGE 005

OVLR YES
DIDD 0
OVLS YES
OVLT 0
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
ADAN DCH 41
CTYP MSDL
DNUM 15
PORT 1
DES QSIG_MTB
USR PRI
DCHL 23
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
NASA YES
IFC ESGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 22
RCAP NCT COLP NDS CCBS CCNR
MBGA NO
OVLR YES
DIDD 0
OVLS YES
OVLT 0
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
--------------------------------------------------------------------------

>ld 21
PT1000
-------------------System route TO MD-110
REQ: prt
TYPE: rdb
CUST 0
ROUT 3

TYPE RDB
CUST 00
ROUT 3
DES QSIG UTB
TKTP TIE
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC ESGF
SBN NO
PNI 00002
NCNA NO
ERR225 0 7

NCRD NO
CTYP CDP
INAC NO
ISAR NO
TGAR 0
CPFXS YES
ADDP NO
DSEL VOD
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 3003
TCPP NO
TARG 01
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
MFC NO
DTA203 23 3 0

ICIS YES
OGIS YES
DTA203 23 0 2

TIMR
DTA203 23 0 1
ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 5376
RGV 640
GTO 896
GTI 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DTD NO
SCDT NO


PAGE 002

2 DT NO
DRNG NO
CDR NO
NATL YES
SSL
CFWR NO
IDOP NO
MUS NO
PANS YES
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 9
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
OHQT 00
AUTH NO
TDET NO
TTBL 0
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
SGRP 0
AACR NO
--------------------------------------------------------------------------
>ld 20

PT0000
REQ: prt

TN 3 4
DATE
PAGE
DES


TN 003 04------------------Trk route member for MD-110
TYPE TIE
CDEN SD
CUST 0
TRK PRI2
PDCA 1
PCML A
NCOS 0
RTMB 3 4
B-CHANNEL SIGNALING
TGAR 0
CLS UNR DIP WTA LPR APN THFD BARD
P10 VNL
TKID
DATE 5 OCT 1997
---------------------------------------------------------------------

 

[johnpoole]

he's right, he has to out the trunk then the route then modify the dch, some params on the dchannel will allow a change others require the settings to be done on the 1st try. if you notice the rcap prompt on the dch, he doesn't have nd2 (name display type 2) rls 22 was a new rls around the time 486 cpu's were new, so i may be a little rusty on that software. if he is sending names, i don't see where it's turned on. have him do a enl msgo 40 in load 96, that is msg's outgoing on the pri. if he is sending names that will prove or disprove it. your end is set up right,i don't see an additional prompt i would adjust. because of the rls of the 61, you may need to turn on qsig between the two. anyone who an expert on the grey boxes will not admit it, knowing the merridian is learning that the experts are the techs that know they can stll learn another prompt. in 35 years i have never met a person that knows everything this switch will do, myself included

john poole
bellsouth business
columbia,sc

 

[antek]

Dear Mr. Johnpoole
I am very thanks for you kindly support.
If you mean by this (you may need to turn on qsig between the two) to open Qsig between the two MD we already open it and if we replace Meridian by MD for test every thing will working well ,also notes that when we dial any analogy extensions from MD number one to Meridian we get PRIVET at our screen that mean the connection between MD one and Meridian not Qsig

BR