Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meridian Opt 11 QSIG capability

Status
Not open for further replies.

lovemyphone

Technical User
Nov 24, 2004
53
CA
Hi,I am trying to enable voip with Meridian via cisco.I realize I need to have qsig package along with pkg 316.How do I know what pkg's are installed?What special cards are req'd (ie. gateway,etc)?Any input is appreciated.I know how to connect the cisco and configure but dont know how to prepare meridian. Thank you for any help.
 
I still dont know how to find out what pkgs are installed but have found answers to what I need to implement qsig.
 
as always, thank you. boy all that searching (hours!)thank you
 
if you have succession, qsig is now standard. If not, it can be a little expensive.

john
 
thank you for that.from printing the cfn i saw that it was qsig enabled but i dont think it is the correct config to interface with cisco as CTYP says TMDI instead of MSDL and IFC says D100 rather than ISGF. also dont see prompt in cfn for QCHID (yes). have checked loads, all seem correct. any ideas or input? thank you in advance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top