Meridian Opt 11 DID calls fail

[bubbaphone]

I have a Meridian Opt. 11 Rls 23 that died (fried memnry board). I reinstalled the DB, added the license keys, and took a default business profile so that the Meridian Mail would be built for me along with the initial CFG and CDB. I made only basic changes to the system (added ISDN to the CDB), and created PRI trunks/routing. (This is a lab system, not a working system). Here is the problem:

A Tie line set up for QSIG or 5ESS works fine, incoming and outgoing.

A COT or DID trunk will NOT allow DID calls to process properly. The call comes in, but is immediately routed to the AutoAttendant. LD 80 trace shows call come in, first printout shows dialed digits = 7000, second printout shows actual dialed digits, for example 4224.

LD 90 D-Channel print shows the correct information. The routes are all built with the same NCOS and TGAR. No station has restrictions or forwarding.

I know it's something I missed in the initial configuration, but I can't locate it. I've beaten the documents to death and cannot find what causes this to happen. I need to get DID working so that testing can proceed with this system integration.
Any help would be greatly appreciated!
bubbaphone

 

[johnpoole]

add a ldn 0 that is the same length as your did string

john poole
bellsouth business
columbia,sc

 

[bubbaphone]

Thanks for the quick response. I have LDN0 = 7777, but still no DID calls.

 

[mluckie1]

First check to see if your DTR's are built. If not build them, if this is an OPT11 DTR's should be TN 0 0 to 0 7, then check to make sure that DTN is specified in the CLS of the trunk members.

 

[johnpoole]

i was bitten by that one once, no analog sets but did required dtr, the reason i guessed ldn is that most people don't realize that is the only place to tell the switch how many digits the co is going to send..

john poole
bellsouth business
columbia,sc

 

[johnpoole]

in the newer 11 the dtr;s go in on slots 0 1 thru 0 7

john poole
bellsouth business
columbia,sc

 

[bubbaphone]

Thnaks for all the help! I got it working. Removed NIT data from CDB and made a change to the NET data to add location information (DUH!).

 

[johnpoole]

yep but it was fun, was it good for you?

john poole
bellsouth business
columbia,sc

 

[bubbaphone]

Hey John...I need to get in touch with you about some upcoming stuff we have here. How do I go about that?
I have a yahoo account I keep for abnormal contact in case spam hits it. Would that work?

 

[johnpoole]

can't post emails or phone numbers here

john poole
bellsouth business
columbia,sc