bubbaphone
Technical User
I have a Meridian Opt. 11 Rls 23 that died (fried memnry board). I reinstalled the DB, added the license keys, and took a default business profile so that the Meridian Mail would be built for me along with the initial CFG and CDB. I made only basic changes to the system (added ISDN to the CDB), and created PRI trunks/routing. (This is a lab system, not a working system). Here is the problem:
A Tie line set up for QSIG or 5ESS works fine, incoming and outgoing.
A COT or DID trunk will NOT allow DID calls to process properly. The call comes in, but is immediately routed to the AutoAttendant. LD 80 trace shows call come in, first printout shows dialed digits = 7000, second printout shows actual dialed digits, for example 4224.
LD 90 D-Channel print shows the correct information. The routes are all built with the same NCOS and TGAR. No station has restrictions or forwarding.
I know it's something I missed in the initial configuration, but I can't locate it. I've beaten the documents to death and cannot find what causes this to happen. I need to get DID working so that testing can proceed with this system integration.
Any help would be greatly appreciated!
bubbaphone
A Tie line set up for QSIG or 5ESS works fine, incoming and outgoing.
A COT or DID trunk will NOT allow DID calls to process properly. The call comes in, but is immediately routed to the AutoAttendant. LD 80 trace shows call come in, first printout shows dialed digits = 7000, second printout shows actual dialed digits, for example 4224.
LD 90 D-Channel print shows the correct information. The routes are all built with the same NCOS and TGAR. No station has restrictions or forwarding.
I know it's something I missed in the initial configuration, but I can't locate it. I've beaten the documents to death and cannot find what causes this to happen. I need to get DID working so that testing can proceed with this system integration.
Any help would be greatly appreciated!
bubbaphone