Meridian Mail terminal help

[PhilBreau]

I'm having a problem getting a list of users. From the main menu I select 1 for User Admin. The next menu, I select 1 for Local Voice User. The next menu, there are soft keys listed at the bottom: Exit, Add, View/Modify, Delete, Find. I believe these these are selectable by using function keys F1 - F5. F1 through F4 work fine. I want to use the Find feature so I'm hitting F5. Nothing happens. When I use Procomm, I turn on the monitor window to see whats happening. F1 to F4 are sending characters. F5 does not. The characters being sent are:

F1=<esc>OP
F2=<esc>OQ
F3=<esc>OR
F4=<esc>OS

I can emulate the function keys by pressing escape and the letters representing the function key. I tried escape OT to emulate what I believe would be F5. This didn't work. I tried all Function keys and escape sequences from <esc>OT through <esc>OZ. Nothing happens. Does anyone know what the escape sequence is for the fifth softkey?

Thank you

 

[Firebird Scrambler]

I use Procomm Plus most days in VT 320 MODE. f1 TO f4 work fine, but I use f10 to replace the f5 key on the screen.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[PhilBreau]

Thank you for your response. I'll give it a try.

Phil

 

[CollegeFootball]

In Keyboard Editor set up F5 for ^[OM

 

[Splic3d]

If you use VT-100, VT=510 or WYSE-75 you can use F6 thru F10.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx