meridian basics

[lovemyphone]

Hi I am a x nortel passport/dms-er and have just landed a job for the meridian. i have all the books but cant remember from 15 years ago. here goes humiliation - i understand that i must us LDs to pull up a certain pkg but (heres the kicker) once ive logged in and put in the pw how do i actually load a program. for example do i just type in ld 86 or whatever? is there a place that can give me an overview of the basic commands other than the massive ntps? thank you in advance-excuse the ignorance!

 

[ccastillo]

You are correct. For example:

LD 20 <enter>
REQ NEW <ENTER>
TYPE 2008 <ENTER>

etc etc....

I'm not ure about the overview you are asking for.

Hope This Helps,

 

[johnpoole]

the nortel website may have a list of loads, ld 20 will prt dn,s and tn's you can also add or change analog or digital sets and do stat x x x x on a tn.. 15 years ago that took ld's 10,11 20 and 32... now they are all linked... new trunks are in ld 14 new routes are in ld 16.. cust data block can be printed in 21 and changed in ld 15.. cfn (adan) can be printed in load 22 and mod in load 17..let us know what you are trying to do and someone will get you started.. the job should have a set of 3 i/o manuals..

john poole
bellsouth business
columbia,sc

 

[lovemyphone]

thank you john and ccastilo for assisting me. unfortunately there is not a manual to be found nor are there any helmsmans or any other type of documentation on site (not even records). i found the link techsupport/manuals to be helpful. anyway i will keep you posted and thank you again. any dms ?s i -would be happy to help

 

[AirbornePimp]

Hi,i have made a small txt file with some basic command line interface prompts that can help u if u want.Ill try to get u more info in the next weeks.

Programmation Meridian SL1


Basic commands

LOGI = LOG IN
LOGO = LOG OUT
**** = TO CLOSE LOAD
*** = CANCEL
DNB = DIRECTORY NUMBER (DN)
TNB = TERMINAL NUMBER (TN)

LD 02 (CHANGE HOUR)

1-TTAD = SHOW CURRENT DATE & HOUR
2-STAD MON 22 x xx xx = Configure date and hour

LD 11

CHG = CHANGE ex: Key 00 NUL = Erase config on that key
CPY 1= COPY
DISU = DISEABLE UNIT
DISC = DISEABLE CARD
DISS = DISEABLE SHELF
DISL = DISEABLE LOOP
ENLU = ENABLE UNIT
ENLC = ENABLE CARD
ENLL = ENABLE LOOP
ENLS = ENABLE SHELF
NEW = ADD PHONE
OUT = REMOVE PHONE
PRT = PRINT
STAT = STATUS
IDU = TYPE OF PHONE ( use to ping a phone)
LUDN = LIST UNUSED DN EX: LD 11-PRT-LUDN-CUST =0
LUVU = LIST UNUSED TN TYPE 2000=DIGITAL 500=ANALOG

LD 20

PRINT ALL TN IN PBX = LTN-TNB

LD 22

PBX VERSION = ISS
PBX SERIAL NUMBER = TID
MERIDIAN CONFIGURATION FOLDER = PR- CFN
PRINT ACTIVE PASSWORD LIST = PRT- PWD

LD 23

ACD = AUTOMATIC CALL DISTRIBUTION

LD 43

EDD = BACK-UP SYSTEM

LD 60

1-LCNT
2-STAT

LD 80

TRAC = TRACKING A TN EX: TRAC 24 0 0 0 DEV
DEV = MORE INFO

LD 81

REQ = CNT
CUST = 0
FEAT = SETS (type of phone,sl1,2616,2006,2008,2112,500)

LD 87:

CDP = COORDINATED DIALING PLAN
DSC = DISTANT STEERING CODE

LD 95

NEW = New name
CHG = Change Name

Class of service ( CLS )

Hfa = Handsfree allowed

Document Under construction made by: Jocelyn Rivard
undagroundshit@hotmail.com

 

[lovemyphone]

Thank you AirbornePimp!You are of great help. again anyone out there needing help with dms 100/250/300/500,passport7k,8k,15k,please just ask.what a great forum!