i use meridian to reach the international side.And i have the number plan implemeted on Meridian using CDP.
Mer(site1)<---------mer(My)<-------Avaya(My)
Previosly i had a DTI trunk betwwen them n everything worked fine.i threw the Numbers from Avaya to meridian in the format that meridian wanted for CDP. And meridian was cooly making his role sweet.
But now on the new trunk Qsig E1 on ISGF when i try to call a site outside meridian from avaya the call is rejected ....
(both using trunk ACOD and Dial plan)
the Dchannel diag messages are below
DCH 40 UIPE_IMSG CC_SETUP_IND REF 00007C17 CH 0 TOD 19:53:34
CALLED #:90012489102037 NUM PLAN: E164
PROGRESS: ORIGINATING END IS NOT ISDN
DCH 40 UIPE_OMSG CC_REJECT_REQ REF 0000FC17 CH 4 30 TOD 19:53:34
CAUSE: #42 - SWED EQIP CONGESTION
if the same number had been from a DTI trunk then the call would have been redirected by meridian to its Link to another Meridian at a different site.
Now i get a fast busy on avaya and the above dchannel messages
please help me man
thanks
Mer(site1)<---------mer(My)<-------Avaya(My)
Previosly i had a DTI trunk betwwen them n everything worked fine.i threw the Numbers from Avaya to meridian in the format that meridian wanted for CDP. And meridian was cooly making his role sweet.
But now on the new trunk Qsig E1 on ISGF when i try to call a site outside meridian from avaya the call is rejected ....
(both using trunk ACOD and Dial plan)
the Dchannel diag messages are below
DCH 40 UIPE_IMSG CC_SETUP_IND REF 00007C17 CH 0 TOD 19:53:34
CALLED #:90012489102037 NUM PLAN: E164
PROGRESS: ORIGINATING END IS NOT ISDN
DCH 40 UIPE_OMSG CC_REJECT_REQ REF 0000FC17 CH 4 30 TOD 19:53:34
CAUSE: #42 - SWED EQIP CONGESTION
if the same number had been from a DTI trunk then the call would have been redirected by meridian to its Link to another Meridian at a different site.
Now i get a fast busy on avaya and the above dchannel messages
please help me man
thanks