Meridian 81 C internal call 1

[MefistoAplasta]

How can I only permit internal call to a station(not transfer call neither), right now the outgoing call are block but it can received call from the Auto Atendant?
Meridian 81C

Thanks in advance.

 

[cmawbey]

Restriction by Class of Service

Another method of barring calls is by applying one of seven alternatives in the extension's Class of Service
The seven Class of Service types are:-
UNR - Unrestricted The extension user can dial anywhere they want - literally without restriction.
FRE - Fully Restricted No exchange line access. The extension user can make internal calls, can use privately wired (Tie) lines, however they can have calls using exchange lines transferred to them from another extension user.
FR1 - Fully Restricted 1 Same as FRE, but calls using exchange lines cannot be transferred to them.
FR2 - Fully Restricted 2 This restricts the extension to internal calls only.
SRE - Semi-restricted Allowed outgoing external calls via the attendant console only. Can receive external incoming calls.
TLD - Toll Denied Allowed outgoing calls to certain destinations only. The Meridian 1 monitors the digits that are dialled to determine if the call is to be allowed. This process is called New Flexible Code Restriction.
CTD - Conditionally Toll Like TLD, CTD checks the digits dialled, however CTD Denied only applies when a PSTN route is chosen as an alternative to a private network call.

 

[GHTROUT]

CLS FR2

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[MefistoAplasta]

Thanks both of you

 

[johnpoole]

you can not block transfer to a station.. best bet would be to block it from sending it's dn, and change the number.. ie if no knows the number, they can not call or transfer to it..

most switches use ncos 0 to block external..

john poole
bellsouth business
columbia,sc