Meridian 61C - Cisco IP Telephony 1

[rubenmontilla]

Hi,

Does anybody know how to, using a QSIG link, display names on Cisco IP phones calling from Meridian telephones.

Hardware: Cisco CCM 3.3, Meridian 61C, router 3660.

 

[johnpoole]

do you have nd2 or 3 in your rcap for the d?

john poole
bellsouth business
columbia,sc

 

[rubenmontilla]

Thanks for your reply.

Actually using protocol ISGF (it only support RCAP ND0)

In the router I'm using H.323 (Do you recommend to use MGCP instead?)

 

[BaseBall2000]

I have been using the following config...w/ MGCP...Router set up as DMS100...PBX setup as SL100...Let me know how you make out
REQ PRT
TYPE ADAN DCH 109

ADAN DCH 109
CTYP MSDL
GRP 2
DNUM 8
PORT 3
DES CISCO
USR PRI
DCHL 109
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC S100
SIDE NET
CNEG 1
RLS ID **
RCAP ND2
T200 3
T203 10
N200 3
N201 260
K 7



LD 21
REQ PRT
TYPE RDB
CUST
ROUT 16


TYPE RDB
CUST 00
ROUT 16
DES
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS INT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC S100
SBN NO
PNI 00001
NCNA YES
NCRD YES
CHTY BCH
CTYP UKWN
INAC NO
ISAR NO
CPUB OFF
DAPC NO
BCOT 0
DSEL VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1016
TCPP NO
TARG
CLEN 1
BLIN NO
OABS
INST
ANTK
SIGO STD
ICIS YES
TIMR IFC 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO
RACD NO
EQAR NO
OHQ NO
OHQT 00
CBQ NO
AUTH NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

REQ:

 

[macaodha]

BaseBall2000-

You're a star! I had been tearing my hair out trying to figure out why I was getting name display from the Cisco to the Nortel but not in the other direction. The key was the RCAP ND2 setting on the D-channel.

Thanks!

Regards,

Michael

 

[LanceMI]

Does anyone know if the above non-qsig integration will support Message Waiting Indication?

 

[johnpoole]

i haven't found a way to get mwi to the cisco without qsig, the qsig rcap is qmwi, i tried mwi in a non qsig pri, no lamps.. rls 3 and above qsig is in the basic package

john poole
bellsouth business
columbia,sc