Meridian 61-C: System doesnt startup after resetting

[1981raghav]

Whenever the sysytem {meridian 61-c} restarts, it doesnt come up. It reaches the voting point and we have to disable one core manually to let it come up with other cpu enabled.
It seems its not able to decide which cpu to choose.

Any help would be appreciated

 

[strmwalker]

1981raghav..how long are you waiting to determine that
the cores are not working properly.

no problems only solutions

strmwalker

 

[1981raghav]

strmwalker..its not that core is not working properly..but it seems system is not able to decide which core to choose to come up..when resetted. So if we disable one core then it automatically comes up with second enabled core.

And when in running mode, we can easily switch between cores which means that cores are not faulty i.e they are working properly.

 

[thattekguy]

Sounds like you got some problems that you have to keep reloading the switch.Check all your cabling, swap cpu's(physically), try to sync, probably bad hardware.Does it ever go on the other core after the one that was off is powered back on?