Meridia NTDK20 ISSUE

[meridiantechuser]

Hi to all

I need your help. My SSC NTDK20GA is failing. I couldt find that card yet. So, I would like to know if the NTDK20EA can replace it.

Here are go my PBX Inf:

>ld 22
PT2000
MARP NOT ACTIVATED


REQ iss

CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 3
ISSUE 00
IDLE_SET_DISPLAY NORTEL


>ld 22
PT2000
MARP NOT ACTIVATED


REQ prt
TYPE

SCH0600

TYPE cinv

CPU: NTDK20
Flash Boot: NTDK34FA
AUXRES: 68EC020 - V# ab07
SRAM: 128 kBytes
DRAM: 16 MBytes
Program Store: 32 MBytes
Primary Flash Drive: 16 MBytes
Security dongle is installed.
Dual fibre expansion board #1 installed.
Single ethernet expansion board #2 installed.
FPGA boot version: a
CPLD version: 14


YOUR PROMPT REPLY WILL BE APRECIATED

WV

 

[vztech]

try this

thread798-1083193

also Google this Bulletin # GR 2003-0368-Global


It's only dialtone-VZ

 

[vztech]

http://www.ocs.ru/etc/2003_0368_iss1_1.pdf

It's only dialtone-VZ

 

[meridiantechuser]

Thnks VZTECH. Really seems to be that NTDK20EA could replace NTDK20GA. If you have some vintage between them please let me know. The company is waiting for my response.

thnks

 

[phonz1]

the difference in the vintages is the memory.

 

[johnpoole]

my chart says that the EA will work with rls 23 and below.. so you should be fine..

john poole
bellsouth business
columbia,sc

 

[phonz1]

john, he's at 3.0!

 

[phonz1]

minimum for a 3.0 is the EA, according to the NTPs'

 

[meridiantechuser]

Thanks a lot. I am going to star the process in order to buy a new card NTDK20EA.

My current card NTDK20GA crashed. I cannt save any previuos configuration neither by External Flash nor LD 43 overlay. Thats the reason for why I decided to replace CPU CCS.


regards,

 

[Triton101]

Try ld 143 XBK and transfer to your laptop via Xmodem32 Binary transfer.

Also the flash daughter board has the backup on it so when you move it to the new SSC it should just boot up ok....