Meridain Tele printer/writer 1

[GobberWokkie]

Hi all

I have a Meridian 1 option 11c land on lap to look after and tidy up. pretty much use to the command line now, but the one thing I would like to know if any one can help me is that I dont want to print the information of every time I need to check devices. is there a command to stop or pause the information flying of the screen and only displaying the end of my query ?

 

[janaya]

This is an optiono on your tty. Scroll through the options until you find printing. Ususally, I think it's F2 to suspend printing on a VT terminal. Then you press F2 to start printing again. Not 100% sure of the F key though

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[GobberWokkie]

Hi Janaya and John
Thanks for the info I will try this out later on today.

 

[KCFLHRC]

If it's a VT terminal then it's ctrl F2 to toggle printing off and on

 

[GobberWokkie]

Sorry I have been a bit stupit
on the key board it has a key for stop screen and one for print
but thanks to all for the advice
my next problem is voice mail
so fun and games there

 

[GobberWokkie]

Sorry I have been a bit stupit
there is a key on the keyboard for stop screen and print screen
so thanks to all for their advice
my next adventure is Meridian mail
so fun and games there