Memory Capacity Info

[pallu2k]

Hi

I'm not able to figureout this issue

Config: i have 2 IBM servers with 6GB ram and Single Processor with Windows 2000 Advanced Server(SP4) and Clustering enabled

Problem : Im able to see the 6GB ram in the post screen of the system. but windows shows only 3.9GB

any idea how i could trace the missing ram or what can be the problem

 

[penauroth]

Check the specs for your system board. Although, W2K Adv server will support your 6 Gb of RAM the system board may only support a max of 4 Gb.

Paul

 

[pallu2k]

Hi

the system board supports more than 6gb because
the post is detecting 6GB Ram

 

[emcevee]

I think Win2000 only supports 4Gb of Memory, see the attached KB

http://support.microsoft.com/default.aspx?scid=kb;en-us;308356&Product=win2000

emcevee

 

[Petje]

Check out this KB article...

Windows 2000 Utilities Do Not Display Physical Memory Above 4 GB

http://support.microsoft.com/default.aspx?scid=kb;en-us;255600

Hope this helps..



Petje
A+, MCP, MCSE on NT4.0 and windows 2000 and Windows server 2003 and CCEA