Meet-Me Conferencing disconnect

[CommoGuy101]

Hello everyone,

I have a vdn setup for meet-me conference.
The problem I am having is that when the VDN is created as an expanded conference type callers are connected and hear a reply that they are the first to enter the conference and after about 5-10 seconds they are disconnected.
If I set the VDN for 6-party conference type I get connected and the conference stays stable.
The strange thing is that this was working for quite awhile now. All of a sudden I have been getting disconnects.
Any Ideas at all??

Thank you,
CommoGuy101

 

[98Converter]

For expanded you need to have an EMMC in place... Don't forget your AAR entry to route it appropriately to the EMMC.

Hope this helps.



Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[CommoGuy101]

I have confirmed that the AAR is routing properly.
There is an EMMC in place.
After I confirmed all was set properly I had to reset the EMMC server and it all started working.
Thank you for the help.