Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MedPro UDP Port Range?

Status
Not open for further replies.

ii8206

ISP
Oct 10, 2004
18
HK
I have one MEDPRO & CLAN in my system (G3csiV12) and using G.711.. How many UDP port will be used when making a call to outside?

Thanks and Regards,
ii8206
 
Not sure if you are after this, there is a limit on the maxium number of sockets on a CLAN but cant find it right now, soz

PBX

Capacity Constraints and Feature Limitations
The TN2302 Media Processor board provides up to 64 audio channels. They may
be either:
n channels of hairpin IP-IP. Each hairpin call needs two channels per board,
one to each endpoint
n channels of G.711 IP-TDM
n channels of G.729 or G.723-TDM
n channels of Fax IP-TDM
The number of simultaneous voice channels that one board can handle is limited
to a total of 64. Fax IP-TDM and G.723 or G.729-TDM count as two channels
when determining number of channels in use.
Hairpin and ip-ip direct calls continue to use sockets on a C-LAN board or on a
DEFINITYOne. All three types of connections; ip-tdm, ip-ip hairpin, and ip-ip
direct, still need call control sockets. When registered, a single connect set uses
one socket, a dual connect set in “permanent” mode uses two sockets, and a dual
connect set in “as-needed” mode uses one socket plus one additional socket
whenever active on a call.
 
When you do the command, "change ip-network-region" you will find the range of it's transmitting port.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top