Media Gateway restart

[dlesap]

Hello

I have a CS1000E with MGs. After a change in SUPL on a MG i had to restart that MG. I was unable to find a software command for it. I then power down and up that MG.
Does anyone knows if there is another way to do it?

 

[j68maro]

There is no software reset in normal ld's, but you should be able to go into pdt and do a reboot -1 and it will reboot.

 

[dlesap]

Do you mean that i have to log in the pdt of the SSC of the Media Gateway?
Is it accessible when the MG is synchronized the Call Server?

 

[j68maro]

yes you have to log into the ssc on the mg, if memory serves me correctly you can have tty's programmed to access it, and if it is #1 mg it will be 3,4,5, you should be able to access pdt from any of those.

 

[dlesap]

With CS1000E it's not possible to have serial port anymore on MG. Only each CS have 2 serial ports. It's then absolutly necessary to use the MRV box to connect a system that needs a serial connection (i.e: for CDR)
Instead of it, i may connect to MG SSC through a PTY.

 

[j68maro]

I guess i am getting a little behind, thats ok even if you go in through a pty you should still be able to acess ptd i believe, if not then it is a mute point. I would give it a shot and see what happens