Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Media Gateway link bouncing
- Thread starter ASquires
- Start date
avayaguy23
Systems Engineer
List media-gateway on CM is generally my go to command. If not registered, can you ping the gateway? If you are able to ping and stable, then check to see if the ESS is active and if the gateway is registered on it. One of two ways, log in to the ESS and execute command: reset system 4 or login to gateway and execute command: reset chassis. If gateway is in pending state, login to gateway and execute command: reset chassis.
- Thread starter
- #3
dialtonebone
Technical User
If you want to check out the gateways health from the GW point of view, SSH to the gateway. Run "show logging file contents". You can then see the link if it went up and down and what times. Sometimes it will give some insight that CM would not see.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question