md110 to mxone qsig

[edex]

Hi,

customer wants to link MD110 BC12 to MXone via qisg( future plans for IP networking eventually)
Can someone help with the RODAI and ROCAI settings please

they have also requested we use the exchange number in the called numbers
Site a 552 site b 572

appreciate any help on this guys.!

 

[aastratech]

anyone able to assist on this please.??

 

[mobilmurat]

Here is the Md110 to Md110 QSIG connection configuration.
One site master , one site slave . I dont know MXone command set.
SITE A

<RODAP:ROU=xx;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
xx SL60 H'00000350 H'15580000 H'46200010 NO

<ROCAP:ROU=xx;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP

xx 0110000000000010 5 1110000001 0 30 128 00151514 111100000031 111101

SITE B

<RODAP:ROU=XX;

ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
XX SL60 H'00000350 H'15580000 H'46400010 NO

<ROCAP:ROU=92;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP

XX 7110000000000010 7 3110000001 0 30 128 00151515 111100000031 001100

I hope this information profit to you.

 

[aastratech]

thanks, i will give it a try.

 

[gtw666]

Hi,

This is MX ONE V3.0 sp2 connected to MD110 BC12 ISDN. It's working well.


/* DSS1 (User MD110 ) from link 0 to link 1 */
ROCAC:ROU=x,TRM=4,TRAF=00151515,SEL=7110000010000010,SIG=311110000030,SERV=2101000007,BCAP=111111;
RODAI:ROU=x,TYPE=SL60,VARI=00000000,VARO=044100E0,VARC=00200310;

/* DSS1 (Network MX-ONE) from link 1 to link 0 */
ROCAI:ROU=1,TRM=4,TRAF=00151515,SEL=7110000010000010,SIG=311110000030,SERV=2101000007,BCAP=111111;
RODAI:ROU=1,TYPE=SL60,VARI=00000000,VARO=043100E0,VARC=00200310;


Good luck,

GTW666