Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MD110 Service Codes

Status
Not open for further replies.

lcns

Technical User
Jan 29, 2007
26
0
0
US
can anyone verify the procedure for "follow me and group hunt follow me?

I thought it was *72*xxxx from an extension where xxxx is the follow me point

amd

*72* xxxx*yyyy# for a group

xxxx is the group you want to forward and yyyy is the ansering group?
 
no actually it is *24*<GH>*<internal number>#
the extension from where you execute this procedure must be Master extension (SPEXI:DIR=xxx, OPT=M) or must be an operator.

from BC12 a GH member can divert it's group with *21*<GH>*<internal nr># for internal dest or *22*<GH>#external nr# for external dest. the behaviour is controlled by D6 of the SEL parameter of the GH.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
It is a BC9 system
 
then you only have the *24* option

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top