MD110 Q-Sig to Teleware

[alarmcode91]

Does anyone have experience at connecting MD110 to Teleware using Q-sig.We do not get route optimisation from Teleware.
We are using the following parameters.
<ROCAP:ROU=95;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
95 0110000000000011 3 2110030000 0 30 128 03151515 110100000031 111100
END
<RODAP:ROU=95;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
95 SL60 H'00001310 H'55400000 H'06700000 NO
END

 

[BishBashBosh]

I've got problems with Teleware kit connected to an ISLX via DPNSS.I've been in touch with Teleware and they've told me that Teleware doesn't support route optimisation.
Are you getting calls tromboning up and down the channels?

 

[alarmcode91]

Yes we are getting trunk tromboning,but have been told Teleware does support route optimisation.

 

[BishBashBosh]

The particular fault I'm looking at is calls cutting off after (what's looks like) an attempt at optimisation.I've seen one call take up 13 channels i.e 7 outgoing and 6 incoming trunks.I'll be looking at it in more depth later in the week and I'll update you.

 

[mdfan]

can u give us some printout from the setup of the route optimization , RODDPEST= ; SYIDP; etc. ASPAC:'s