MD110 networked with Meridian option61c

[length]

Dear all,

Im working on a networking Q-sig between MD110 and meridian system using the following parameters from the MD110 side,

RODAP:ROU=72;
72 SL60 H'00001310 H'10000000 H'00000000 NO

ROCAP:ROU=72;
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
72 012000000000 5 2110000010 0 30 128 00151515 111101000031 11111

The problem is any caller from the Meridian side wants to call any extension in the MD110, extensions in the MD110 cannot detect the number(No caller ID), just appears as aprivate number (external).

Please did any one try before this type of networking between these two exchanges ,, if yes please provide me asap with the working paramters which support caller ID.

 

[pelpi1234]

Hi
This works ok.
ROU TYPE VARC VARI VARO FILTER
12 SL60 H'00000350 H'50060000 H'06400000 NO


ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
12 011000000000001 6 2110000001 0 30 128 00151515 511110120030 101111

Regards

 

[length]

Thanks alot for your reply but please can you send me also

1-the RODDP:ROU=xxxxx; to check the ADC of the Q sig route

2- also the KSDDP of one of the digital extensions in order to check the ADC parameters.


3-Finally , at which release the parameters you sent are working on,,, because my customer is still working on BC8.0

thanks in advance

 

[pelpi1234]

Hi

1EST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
607 12 06061000000002500050000 0 1 0

2: DIR TRAF SERV CDIV ROC ITYPE TRM ADC LANG
84970 00050502 100312000 001151000 000001 20 0 00000000010 F
Regards

 

[length]

Thanks alot friend