MD110 modem cable 1

[Gandolf98]

Hi,

anyone know the pinouts and where I could get the 'card end' plug/connector to enable me to make up the cable for on site laptop connectivity into the LIM

Thanks

 

[Rou5]

HI !


V. 24
Pins in card end a02 Rxd, GND, a04, TCLK a06, DCD a08, TXD b02, GND b04, DTR b06, RCLK c02, GND, c04, DSR c06, CTC c08

9-connector pin ...ipu/niu pins
3--------------- a02
2---------------- b02
7----------------- c06-c08 ( both)
8----------------- b08
6----------------- b06
5------------------a04
1----------------- a06
4----------------- a08
this works with niu and ipu.
use 9 pins com port on your laptop
---
connector pins on niu board
A B C
. . . 2
. . . 4
. . . 6
. . . 8
seeing in front side
Luck...

 

[Gandolf98]

Thanks. My next tas is to find a plug for the board on the MD110

 

[MD110]

I have same of this conectors from were are you?

 

[Gandolf98]

I am in the UK.

If you are able I will pass my works address to you

Thanks

 

[UKboy]

Can I ask why you dont just dial in through your modem/tracker, if you request you maintainer to give you the dialin details and tracker Passwords, they should do. (Damovo will)

This would save you having to build a cable.

 

[Gandolf98]

I have just had a system with remote LIMs made into stand alone sites and they have no modem cable to connect a tracker onto.... hence the request for the cable

 

[MD110]

Hi, Gandolf98
Im in Argentina, maybe you can get two connectors in sam Telecom Company, or in same Web page like USEDTELECOM that it is a English company.

 

[cnhui]

Hello,
anyone has the pin scheme for a ipu-modem cable(TSR 902 0403/1000).

Thank you