MD110 Logon Rejected message

[Artifact]

Does anyone know how to solve a 'Logon Rejected' message when i try to login to the MD110 with a serial cable?
I already tried to wait a couple of days, but it doesn't look like a timeout. I don't even get the chance to fill in my password to logon.

Thnx in advance...

 

[GandhiII]

I´m no expert either but I guess I can find out what this message means. Are you sure that the NIU is in the correct board position? Do you have any sort of access to the MD (Ethernet)? What kind of software do you use?

 

[barkerjpb]

Hi, I have had this before, but only on a IPU. Make sure you aren't logging on on buffer mode if you are using Winfiol. It can sometimes give you this problem. Normally getting "Logon Reject" is simply a wrong password entered three or more times.

 

[hiescham]

Hi there !

Try to remove the IPU card from it's position and wait for 2-3 minutes and slot in back. After that try logon again, or you can try to change the Quater Plug Position. If it's fail try to change the IPU card with new one.

 

[73vette]

If this system has an IPU board all you need to do is restart the program unit for the I/O control.

RFPUI:LIM=1,UNIT =TWP2;

 

[gtw666]

Only RFEXI releases this blocking.