MD110 CLIP

[Paul74Cagliari]

Hello!
I have troubles after first steps in MD110-CCM 7 integration. Our MD110 is directly connected to the public network, and to CCM via ISDN-QSIG (TLU-76).

I followed the cisco doc linked here, for BC12 SP5 and CCM 5.0:

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/519719.html

We own a BC11 SP9 and CCM 7.1.5, and had very little troubles following the guide. MD110 listed parameters changed very little, and CCM menus are almost the same at that configuration level.

CLIP - Calling Line (Number) Identification Presentation works between MD110 and CCM. I can see the whole CCM user extension id string.

The problem is:
if you open a call from MD110 to public numbers, the receiver can see the complete number (prefix+isdn root number+extension number)
If you open a call from CCM (so via MD110 qsig) to public numbers, the receiver can only see prefix+isdn root number.

Most likely it's a MD110 misconfiguration, so if you think it's better moving to the MD110 subforum feel free to do.

Thank you for any advice.

 

[whykap]

I would start by debugging the qsig link on the cisco gateway. Run a q931 debug and see if the call is passing the information you ae missing. That will help you see if the issue is on the cisco or Erickson side. We can go grom there.

 

[Paul74Cagliari]

Thank you whykap. I already traced a call originating in call manager (ext. 7797) to a public number. Tell me if the q931 is still required to solve the problem.

STUNI:LIM=3,UNIT=SLP60,MSKSIG=02&03&A1,STORE=YES;
STTSI:TRI=1;
STTSE:TRI=1;
STRAP:TRI=1;

If you have access to SAM software, you can see the calling party is involved in the process:

CALLING PARTY IE:
Type of Number: Unknown
Numbering Plan Identification: ISDN numbering plan
Presentation Indicator: Presentation Allowed
Spare, reserved
Screening Indicator: User provided, verified and passed
Calling Party Number: 7797

Here is the complete log:

TIME LINE(S)
20.40.43.060 00001 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 3-3-60-00
TO SLP60 (H'037B) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'03 H'08 H'02 H'00 H'0C H'05 H'A1 H'04 H'03
010 H'80 H'90 H'A3 H'18 H'03 H'A9 H'83 H'81 H'1C H'17
020 H'9F H'AA H'06 H'80 H'01 H'00 H'82 H'01 H'00 H'A1
030 H'0C H'02 H'01 H'00 H'02 H'01 H'00 H'80 H'04 H'37
040 H'37 H'39 H'37 H'6C H'06 H'01 H'81 H'37 H'37 H'39
050 H'37 H'70 H'0C H'A9 H'30 H'33 H'32 H'38 H'30 H'37
060 H'33 H'32 H'38 H'35 H'31 H'00 H'00 H'00 H'00 H'00
070 H'00 H'00 H'00
20.40.43.140 00002 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 003
TO EQU NO 3-3-60-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'0C H'02 H'18 H'03 H'A9 H'83 H'81
010 H'02 H'03 H'F7 H'98 H'02 H'04 H'02 H'82
20.40.43.500 00003 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 003
TO EQU NO 3-3-60-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'0C H'03 H'08 H'02 H'81 H'80 H'1E
010 H'02 H'A1 H'90 H'02 H'03 H'F7 H'98 H'02 H'04 H'02
020 H'82
20.40.48.120 00004 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 003
TO EQU NO 3-3-60-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'0C H'01 H'1C H'1E H'9F H'AA H'06
010 H'80 H'01 H'00 H'82 H'01 H'00 H'8B H'01 H'00 H'A1
020 H'10 H'02 H'01 H'01 H'02 H'01 H'55 H'30 H'08 H'82
030 H'03 H'01 H'B0 H'50 H'86 H'01 H'00 H'1E H'02 H'82
040 H'88 H'1E H'02 H'A1 H'90 H'02 H'03 H'F7 H'98 H'02
050 H'04 H'02 H'82
20.40.50.500 00005 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 003
TO EQU NO 3-3-60-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'0C H'07 H'1C H'1E H'9F H'AA H'06
010 H'80 H'01 H'00 H'82 H'01 H'00 H'8B H'01 H'00 H'A1
020 H'10 H'02 H'01 H'02 H'02 H'01 H'55 H'30 H'08 H'82
030 H'03 H'01 H'B0 H'50 H'86 H'01 H'00 H'4C H'02 H'01
040 H'A1 H'02 H'03 H'F7 H'98 H'02 H'04 H'02 H'82
20.40.50.540 00006 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 3-3-60-00
TO SLP60 (H'037B) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'03 H'08 H'02 H'00 H'0C H'0F H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
20.40.56.900 00007 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 3-3-60-00
TO SLP60 (H'037B) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'03 H'08 H'02 H'00 H'0C H'45 H'08 H'02 H'82
010 H'90 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
20.40.57.040 00008 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 003
TO EQU NO 3-3-60-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'0C H'4D H'08 H'02 H'80 H'90 H'02
010 H'03 H'F7 H'98 H'02 H'04 H'02 H'82
20.40.57.100 00009 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 3-3-60-00
TO SLP60 (H'037B) EXE A IN LIM 003
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'03 H'08 H'02 H'00 H'0C H'5A H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00

 

[whykap]

is this from the erickson side? I don't know jack about that system or what SAM is.

 

[singhbrindisi]

Paul,

I have done similar setup & it works for me. Pls put in your route parameters between MD & CM.

Also as whykap suggested you need to run q931 debug on the router between MD & CM. this way you will be sure that complete info is arriving from CM to the router. Afterwards your Aastra parameters will be helpful.

Their are caller I'd parameters in CM too. Ensure that those are active but in any case they will be captured in q931 debug.

I am still in the learning phase of CM so will rely on expert advise of other members to guide you on the issue.

Cheers

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[Paul74Cagliari]

I'm very sorry for replying so late, but had dozens of critical issues in other areas and no time to check this thread!

Thank you for all precious info.

I runned a q931 debug on the router, which you can add to previous data.
@whycap: SAM is the Ericsson software package

The following is a short external call:

*Jun 26 19:32:34.861: ISDN Se0/0/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x48309FA8 datasize = 79
*Jun 26 19:32:34.861: ISDN Se0/0/0:15 Q931d: data =
*Jun 26 19:32:34.861: 48309FA800000003024004EC00010000
*Jun 26 19:32:34.861: 0802110F05A104038090A31803A98381
*Jun 26 19:32:34.861: 1C179FAA06800100820100A10C020100
*Jun 26 19:32:34.861: 0201008004373739376C060181373739
*Jun 26 19:32:34.861: 37700CA93033323830373332383531
*Jun 26 19:32:43.573: ISDN Se0/0/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x48309FA8 datasize = 21
*Jun 26 19:32:43.573: ISDN Se0/0/0:15 Q931d: data =
*Jun 26 19:32:43.573: 48309FA800000003024004EC00010000
*Jun 26 19:32:43.573: 0802110F0F

Route parameters for the trunk between CM and MD110 BC11Sp9

ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
98 711000000000001 5 2110030001 0 30 128 03151515 111110000031 111111