We are currently on BC10 for our main telephony system and about to upgrade to BC12. Our Call Centre is AVAYA S8300 based. We have lab tested between BC11 and S8300 but have issues with call path replacement and call forwarding not functioning. We have configuration settings for the MD110 but have not been able to obtain similar for the AVAYA. Anyone out there had similar experience or able to help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MD110 BC11 & AVAYA S8300 QSig Interoperability
- Thread starter chis1
- Start date
Read this thread, it may help you.
We have MD110 BC12 to Avaya running here and the only thing that does not work is Message Waiting.
We have MD110 BC12 to Avaya running here and the only thing that does not work is Message Waiting.
- Status
