MD110 access through Modem (remote)

[dnaserver]

Hi,

this is my first time to access our MD110 system (BC9) through Modem from home. I'm using DOS based Fiol.
What is the dial up procedure to access my remote MD110.
Is there any command in DOS based fiol to dial directly to our MD110. ?

Thanks in advance

 

[jay944]

assuming the following examples,
dial in number is 02088008000
bc11 password help user help

(from memory)
1> press f5 key, select TTY mode
2> type ATH (response) ok
3> type ATDT 0208800800 you should heard it dialling out
4> when MD connects response is something like

>Connect 33600 vbis (press enter once, capslock on)
now type in the tracker password (maybe PASSWORD eg)
>Tracker 2650 ON-LINE
1> (at this prompt type ;me
>ok

then do your SSSSSSSSSSS;

any problems holla back






----------------------------------------
Porsche, There is no substitute.

http://www.playback.demon.co.uk/porsche/graphic/sl16decal-big.jpg

 

[HIREI]

It's so hard... )) . If you can, install WinFIOL. We use BC9 too. Modem BYB2424 installed in MD110.

All we do to connect from remote site: open WinFIOL, press F5, number defined earlier, window with this number, press OK. Then connect with modem, appears window, print psw, press OK and work.

Or that - window with the number, press OK, connection, then press F5, window appears, type psw, OK and work.