Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MCR or Hunt key?

Status
Not open for further replies.

is2teli

MIS
Mar 7, 2005
299
US
Hi, it's been awhile on programming. I need to have calls ring to one phone extension & then after 4 rings, ring to another extension and if no one answers, go to a general vm box? MCR would ring all of the lines?
 
What is the simplest way with just 2 phone extensions? Thanks for the hlep~~~
 
I have created a phantom that hunts to my first extension and then then from the phantom DCFW to my second extension. However I am running into the issue that it will never go to voice mail. I do not want their personal extensions impacted: below is phantom and extension one.can anyone assist?

DES ESALE
TN 158 0 00 14 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 6840 0 MARP
CPND
NAME EXT SALES
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 36840
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR
RCO 2
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR DCFW 6 36841
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top