I have 4 phones all mcr keys with 4 numbers. Example:
DES ICU
TN 020 0 05 03
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN
TGAR 0
LDN NO
NCOS 5
SGRP 0
RNPG 82
SCI 0
SSU 0000
XLST
CLS UNR FBD WTA LPR PUA MTD FND HTD ADD HFD
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CPND_LANG ENG
HUNT
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 MCR 8479 0 MARP
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
01 MCR 8478 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
02 MCR 8322 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
03 MCR 8678 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
04 TRN
05 AO6
06
07
08
09
10
11
12
13
14
15
DATE 9 MAR 2016
What they want to do is pick up a call on any phone any line, put it on hold then tell someone else to pick up said line on another phone. All 4 phones are set up same as above except the 00 keys are each extension so I can tell them apart..like 8479 on one phone as 00 and 8678 on another as 00 so on and so forth but all are MCR and all in group 82, PUA and GPUA both set. Am I doing something wrong? The users say they cant pick up calls that nothing is flashing on the sets. I am going to lay eyes on it tomorrow but was hoping someone could check my work and let me know if they see something not right or if my plan isn't even an option! I have made mistakes before
Any advice is appreciated. I'm self taught so I question everything i do on this old system.
DES ICU
TN 020 0 05 03
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN
TGAR 0
LDN NO
NCOS 5
SGRP 0
RNPG 82
SCI 0
SSU 0000
XLST
CLS UNR FBD WTA LPR PUA MTD FND HTD ADD HFD
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CPND_LANG ENG
HUNT
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 MCR 8479 0 MARP
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
01 MCR 8478 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
02 MCR 8322 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
03 MCR 8678 0
CPND
NAME ICU
XPLN 5
DISPLAY_FMT FIRST,LAST
04 TRN
05 AO6
06
07
08
09
10
11
12
13
14
15
DATE 9 MAR 2016
What they want to do is pick up a call on any phone any line, put it on hold then tell someone else to pick up said line on another phone. All 4 phones are set up same as above except the 00 keys are each extension so I can tell them apart..like 8479 on one phone as 00 and 8678 on another as 00 so on and so forth but all are MCR and all in group 82, PUA and GPUA both set. Am I doing something wrong? The users say they cant pick up calls that nothing is flashing on the sets. I am going to lay eyes on it tomorrow but was hoping someone could check my work and let me know if they see something not right or if my plan isn't even an option! I have made mistakes before
Any advice is appreciated. I'm self taught so I question everything i do on this old system.