We have two BCM 50's both connected via a SIP trunk for direct dialing at some point in the past and now it's not working. We're thinking a potential firewall/IP change. Assuming the only thing that would need to be verified in the BCM is the public static ips what else should be be checking for?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MCDN Resolution
- Thread starter maxse
- Start date
curlycord
Programmer
Are the SIP trunks/network proven working?
Some full details might help as to what you have done.
What part is not working?
Did you check Monitor?
Tech on site would probably help to go through it all.
=----(((((((((()----=
curlycord
Toronto Canada
Some full details might help as to what you have done.
What part is not working?
Did you check Monitor?
Tech on site would probably help to go through it all.
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Locked
- Question