Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MCDN and Call Pilot
- Thread starter myBCM
- Start date
- Thread starter
- #3
thx alot for the positive reply.
I currently have 2xBCM50 rel 1(test units) and need to create a small call center with 2xIP phones and 3xT7316E also want to add a voice message(call pilot).What comes first in programming?and how do I get the sytem to work?
your suggestions will be much appreciated.
I currently have 2xBCM50 rel 1(test units) and need to create a small call center with 2xIP phones and 3xT7316E also want to add a voice message(call pilot).What comes first in programming?and how do I get the sytem to work?
your suggestions will be much appreciated.
1st connect a PC to the OEM port, set your PC to get an ip address VIA DHCP.
then brows to 10.10.11.1, you will need to download and install Element manager.
all the documentation will be available at that IP address as well.
you will need a Vendor involved to purchase Key Codes for Call Center and Voicemail boxes. you already have call Pilot, you just might need some mailboxes
then brows to 10.10.11.1, you will need to download and install Element manager.
all the documentation will be available at that IP address as well.
you will need a Vendor involved to purchase Key Codes for Call Center and Voicemail boxes. you already have call Pilot, you just might need some mailboxes
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question